Thursday, 20th of November 2008
Thursday, 20th of November 2008
accessing GPIO pins from the command line
by Scurvy Rat — Friday, August 31st, 2007

echO "GPIO out set" > /proc/gpio/GPIO60
echo "GPIO out clear" > /proc/gpio/GPIO60

sets: sets the pin to 3.3v
clear: sets the pin to 0v
0 comments | not rated | Discuss |  del.icio.us
Tags: gpio
Your Rating: Rate this post.Overall Rating:
(0 votes)

Already a member? Please sign in here
 
Not a Member? Click here to create a new login or enter the info below.
NameEmail (Only for verification)
Comment
Are you human?: Please enter in the text in the image below (this helps us keep out robots and spam)